Hardware options installation 110
b.
Insert a pen or a small screwdriver into one of the slot cover hole to push the air blocker down,
and then remove the air blocker from the chassis.
Retain the air blocker for future use.
18. Install the access panel (on page 30).
19. Install the server into the rack (on page 45).
20. Power up the server (on page 19).
Redundant fan option
To provide sufficient airflow to the system if a fan fails, the server supports redundant fans.
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
Fan population guidelines
• Single processor, non-redundant configuration:
To Next Page
Loading...
Need help?
General