HP Apollo 4200 Gen9 User Manual

Hardware options installation 121
To install the component:
1. Power down the server (on page 19).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Remove the server from the rack (on page 28).
4. Remove the access panel (on page 29).
5. Remove the FlexibleLOM blank.
6. Install the FlexibleLOM adapter.
7. Install the access panel (on page 30).
8. Install the server into the rack (on page 45).
9. Connect the LAN segment cables.
10. Power up the server (on page 19).

HP Apollo 4200 Gen9 Specifications

General

Brand	HP
Model	Apollo 4200 Gen9
Category	Server
Language	English