NOTE: Remember that:
• E shows only event logs for Warning, Critical, or Fatal faults by default; F shows all event
log outputs.
• System Event Logs (SELs) are never overwritten, unless they are first manually cleared:
since they employ ring buffering, oldest logs get overwritten first. Forward Progress Logs
(FPL) are circular and contain additional, non-critical information.
• The alert threshold can be changed.
iLO 2 MP Event Logs
The iLO 2 MP provides diagnostic and configuration capabilities. See the HP Integrity Integrated
Lights-Out 2 Management Processor Operations Guide for details on the iLO 2 MP commands. To
access the iLO 2 MP, do the following:
NOTE: The iLO 2 MP must be accessed from a terminal console which has access to the iLO 2
MP.
1. Login with proper username and password.
NOTE: Default operator login and password: login = oper, password = oper.
2. Press cl to display the console history log. This log displays console history from oldest to
newest.
3. Press sl to display the status logs. The status logs consist of:
• System Event
• Forward Progress
• Current Boot
• Previous Boot
• Live Events
• Clear SEL/FPL Logs
4. For a more information on configuring the iLO 2 MP and using the iLO 2 MP commands,
see the HP Integrity iLO 2 MP Operations Guides.
System Event Log (SEL) Review
1. Access the main menu under the iLO 2 MP command prompt (entering cm brings you to
the command menu).
2. Run the sl command. The Event Log Viewer menu displays:
SL
Event Log Viewer:
Log Name Entries % Full Latest Entry
-------------------------------------------------------------------
E - System Event 9 1 % 29 Oct 2002 19:15:05
F - Forward Progress 129 3 %
B - Current Boot 82
P - Previous Boot 0
C - Clear All Logs
L - Live Events
Enter menu item or [Ctrl-B] to Quit:
3. Selecte to review the system events. The Event Log Navigation menu displays:
Enter menu item or [Ctrl-B] to Quit: e
120 Troubleshooting
To Next Page
Loading...
