Setup Checklist
Use the checklist in Table 3-5 to assist with the Integrity iLO 2 MP setup process.
Table 3-5 Setup Checklist
XActionStep
Standard Setup
Preparation1 1. Determine an access method to select and connect the cables.
2. Determine a LAN configuration method and assign an IP
address if necessary.
Choose one of the three methods to configure the LAN for iLO 2
MP access:
Configure the iLO 2 MP LAN2
• DHCP with DNS
• ARP Ping
• RS-232 serial port
Log in to the iLO 2 MP from a supported web browser or command
line using the default user name and password.
Log on to the iLO 2 MP3
Change the default user name and password on the administrator
account to your predefined selections.
Change default user name and
password
4
Set up the user accounts if you are using the local accounts feature.Set up user accounts5
Set up the security access settings.Set up security access6
Advanced Setup
Activate advanced features by entering a license key.Activate Advanced Pack Features1
68 Installing the Server
To Next Page
Loading...
