HP Integrity rx2660

Syntax
monarch <cpu>
Parameters
<cpu> specifies a cpu
Operation
If specified with no parameters, monarch displays the Monarch processor for the server.
Specifying a processor number alters the preferred Monarch processor. None of these changes
takes affect until after a reboot.
Example C-20 monarch command
Shell> monarch
Current Preferred
Monarch Monarch Possible Warnings
------- --------- -----------------
0 0
0 0
To view monarch: fs0 :\ monarch
| Processor
-----------------+-----------
current status | 0
next boot status | 0
To set the monarch processor to 1: fs0 :\ monarch 1
| Processor
-----------------+-----------
current status | 0
next boot status | 1
pdt
Displays or clears the contents of the Page Deallocation Table (PDT).
Syntax
pdt (clear)
Parameters
<clear> clears the pdt
Operation
With no options specified, the command displays the PDT information for the server. The PDT
is cleared and a reboot is required for memory reallocation and safe booting.
230 Utilities