Table 5-22 I/O Card Events That May Light System Insight Display LEDs (continued)
NotesSourceCauseSample IPMI EventsDiagnostic
LED(s)
beyond the supported
limit
configuration
exceed”
Display EFI
warning message
SFWInsufficient power to
power on a hot-plug
PCI-X slot
Type E0h, 137d:26d
IO_NOT_ENOUGH_POWER_ERROR
I/O Card
“Failed I/O
slot(s)
deconfigured”
Either a card /
slot problem.
Re-seat card first.
SFWPCI slot standby
power failed
Type E0h, 147d:26d
IO_SLOT_STANDBY_POWER_ERROR
I/O Card
Either a card /
slot problem.
Re-seat card first.
SFWPCI-X hot-plug
controller failed
Type E0h, 131d:26d
IO_HOT_PLUG_CTRL_FAILED
I/O Card
Remove any
unsupported I/O
SFWPCI bus walk (I/O
discovery) resources
exceeded
Type E0h, 139d:26d
IO_PCI_MAPPING_TOO_BIG
I/O Card
cards. Move I/O
card to an
unused PCI slot
SFWFound invalid
PCIXCAP value
Type E0h, 148d:26d
IO_UNKNOWN_PCIXCAP_VAL
I/O Card
SFWPCIXCAP sampling
error
Type E0h, 141d:26d
IO_PCIXCAP_SAMPLE_ERROR
I/O Card
SFWExpected I/O host
bridge (Lower Bus
Adapter) is missing
Type E0h, 123d:26d
IO_CHECK_LBA_MISSING_ERR
I/O Card
SFWExpected I/O host
bridge (Lower Bus
Type E0h, 619d:26d
IO_CHECK_LBA_DECONFIG_ERR
I/O Card
Adapter) is
deconfigured
SFWI/O LBA clear error
failed
Type E0h, 133d:26d
IO_LBA_CLEAR_ERR_FAILED
I/O Card
SFWI/O SBA clear error
failed
Type E0h, 144d:26d
IO_SBA_CLEAR_ERR_FAILED
I/O Card
SFWPCI-X slot power on
error
Type E0h, 146d:26d
IO_SLOT_POWER_ON_ERROR
I/O Card
SFWPCI-X slot has
incorrect default
power state
Type E0h, 145d:26d
IO_SLOT_POWER_DEFAULT_ERROR
I/O Card
SFWI/O host bridge
(Lower Bus Adapter)
Type E0h, 136d:26d
IO_LBA_RESET_ERROR
I/O Card
is inaccessible because
rope reset failed to
complete
SFWPCI clock DLL errorType E0h, 130d:26dI/O Card
IO_DLL_ERROR
SFWI/O rope reset failed
to complete
Type E0h, 143d:26d
IO_ROPE_RESET_ERROR
I/O Card
132 Troubleshooting
To Next Page
Loading...
Need help?
General