HP integrity rx2800 i4 User Manual

7. Install the component as described above.
Removing and replacing the intrusion switch cable
The intrusion switch screws face CPU 0.
1. Power off the server (“Powering off the server” (page 99)).
2. Remove the access panel (“Removing and replacing the access panel” (page 106)).
3. Remove the PCI riser cage (“Removing and replacing the PCI riser cage” (page 111)).
4. Open the processor cage.
5. Using a screwdriver, remove the switch.
HP Confidential Removing and replacing the intrusion switch cable 125

HP integrity rx2800 i4 Specifications

General

Number of Processors	1 or 2
Memory Slots	24 DIMM slots
Processor Cores	4 or 8 per processor
Cache	32 MB L3 per processor
Memory	Up to 384 GB DDR3
Storage	Up to 8 SFF SAS/SATA drives
RAID Support	RAID 0, 1, 5, 6
Network	Integrated 10/100/1000Base-T Ethernet
Network Controller	HP NC382i
Expansion Slots	6 PCIe 2.0 slots
Power Supply	Hot-plug redundant power supplies
Operating Systems	HP-UX, Linux
Form Factor	2U Rack
Processor Speed	1.73 GHz, 2.13 GHz, or 2.53 GHz