To Next Page

To Previous Page

3. After performing the installation or maintenance procedure, slide the server back into the rack,

and then press the server firmly into the rack to secure it in place.

WARNING! To reduce the risk of personal injury, be careful when pressing the server

rail-release latches and sliding the server into the rack. The sliding rails might pinch your

fingers.

Accessing internal components for a pedestal-mounted server

1. Power off the server and remove all cables.

2. Remove the pedestal kit feet.

HP Confidential96 Removal and replacement procedures

Questions and Answers:

Need help?

Do you have a question about the HP integrity rx2800 i4 and is the answer not in the manual?

HP integrity rx2800 i4 Specifications

General

Number of Processors	1 or 2
Memory Slots	24 DIMM slots
Processor Cores	4 or 8 per processor
Cache	32 MB L3 per processor
Memory	Up to 384 GB DDR3
Storage	Up to 8 SFF SAS/SATA drives
RAID Support	RAID 0, 1, 5, 6
Network	Integrated 10/100/1000Base-T Ethernet
Network Controller	HP NC382i
Expansion Slots	6 PCIe 2.0 slots
Power Supply	Hot-plug redundant power supplies
Operating Systems	HP-UX, Linux
Form Factor	2U Rack
Processor Speed	1.73 GHz, 2.13 GHz, or 2.53 GHz