HP Integrity Superdome 2 16-socket - Interconnect Management Commands; Assign Interconnect; Clear Interconnect Session; Connect Interconnect

16 Interconnect management commands
ASSIGN INTERCONNECT
• Command:
ASSIGN INTERCONNECT {ALL | <bay number> [{ , | - } <bay number>]}
{"<user name> | LDAP GROUP <LDAP group name>"}
• Description:
Assigns interconnects specified to an existing user or group
• Access level/Bay level:
OA Administrator
• Restrictions:
None
CLEAR INTERCONNECT SESSION
• Command:
CLEAR INTERCONNECT SESSION <bay number>
• Description:
Terminates a serial console session of a user on an interconnect. The termination is not graceful
and the user loses any unsaved work.
• Access level/Bay level:
Administrator, operator◦
◦ Bay specific
• Restrictions:
You must have explicit access to a bay given by the ASSIGN INTERCONNECT command.
CONNECT INTERCONNECT
• Command:
CONNECT INTERCONNECT <bay number>
• Description:
Connects the user to the serial console of the interconnect present in the interconnect module
bay
• Access level/Bay level:
All◦
◦ Bay specific
• Restrictions:
You must have explicit access to a bay given by the ASSIGN INTERCONNECT command.
108 Interconnect management commands