HP Integrity Superdome 2 16-socket - Set LDAP Group Access

SET LDAP GROUP ACCESS
• Command
SET LDAP GROUP ACCESS "<group name>" {ADMINISTRATOR | OPERATOR | USER}
• Description:
Sets the LDAP group access level.◦
◦ Additionally, use the ASSIGN OA command to give a user or group rights to the Onboard
Administrator.
• Access level/Bay level:
OA Administrator
• Restrictions:
None
SET LDAP GROUP DESCRIPTION
• Command:
SET LDAP GROUP DESCRIPTION "<group name>" "<description>"
• Description:
Sets the LDAP group description field
• Access level/Bay level:
OA Administrator
• Restrictions:
Must be 0 to 58 characters in length.◦
◦ Valid characters are all alphanumeric, the underscore (_), the dash (-), and spaces.
◦ If the group name or description field contains spaces or zero characters, use double
quotes.
SET LDAP NAME MAP
• Command:
SET LDAP NAME MAP {ON|OFF}
• Description:
Turns on NT name mapping to enable the user to enter their NT domain\user name
• Access level/Bay level:
OA Administrator
• Restrictions:
None
SET LDAP GROUP ACCESS 37