NOTE: The DIMM error table for indicted DIMMs is also displayed as part of the output from the
show <memory_location> command.
Location Installation/Health History - Mon Feb 14 14:51:46 2011
--------------------------------------------------
FRU Type: Blade DIMM
Location: 0x0100FF0800090A74 enclosure1/blade8/cpusocket0/dimm9
Timestamp: Thu Dec 16 15:20:16 2010
Indictment State: Not Indicted
Requested Deconfig State: Configured
Current Deconfig State: Not available
dimm-1/8/0/9 Location: 9A
Status: OK No Errors Logged.
-- Install History 1 ---
Discovery: Discovery
Timestamp: Thu Feb 10 15:31:11 2011
Serial Num: EA0DB9BF
Parent Serial: MYJ84901ZH
Part Num: 9JSF12872PY
Spare Part Num: 9JSF12872PY
Manufacturer: 2C
Product Name: DDR3 DIMM
DIMM size: 1024 MB
myhost-HR>
INDICT
• Command:
INDICT <physical location>
• Description:
Manually indicts a specified component
• Access level/Bay level:
All
• Restrictions:
The <physical location> value must be formatted as either an 8–byte hexadecimal
integer, or a long or medium hardware resource path string (short form strings are not
supported).
◦
◦ Must be in the Health Repository viewer.
SHOW ACQUIT
• Command:
INDICT 157
To Next Page
Loading...
