HP Integrity Superdome 2 16-socket - Set Alertmail Mailbox

REMOVE TRUSTED HOST
• Command:
REMOVE TRUSTED HOST <ip address>
• Description:
Removes an IP address from the list of systems permitted to connect to the Onboard
Administrator
• Access level/Bay level:
OA Administrator, OA Operator
• Restrictions:
The <ip address> must be in the form ###.###.###.### or ###.###.###.###/##, where
each ### ranges from 0 to 255 and each ## from 0 to 32. Use the ## to specify a subnet
(for example, 192.168.1.0/24).
NOTE: 0.0.0.0 and 255.255.255.255 are not valid values for <ip address>.
SET ALERTMAIL MAILBOX
• Command:
SET ALERTMAIL MAILBOX "<email address>"
• Description:
Sets the email address where events are sent
• Access level/Bay level:
OA Administrator, OA Operator
• Restrictions:
None
SET ALERTMAIL SENDERDOMAIN
• Command:
SET ALERTMAIL SENDERDOMAIN "<domain>"
• Description:
Sets the AlertMail domain. This is the DNS domain where the Onboard Administrator is located
(for example, AB.com).
• Access level/Bay level:
OA Administrator, OA Operator
• Restrictions:
None
SET ALERTMAIL SMTPSERVER
• Command:
SET ALERTMAIL SMTPSERVER <ip address>
• Description:
Sets the AlertMaill SMTP server. This is the mail server where the Onboard Administrator
delivers email-based events.
64 Enclosure network configuration commands