HP Integrity Superdome 2 16-socket - PARMODIFY

MeaningOption
requested resources specified in the parspec is not
available for assignment to the partition at boot time.
Enable/Disable VGA in an nPartition. The flag value
can be either enable or disable. By default, VGA
[-V flag]
is enabled in an nPartition. VGA is always disabled
when running vPars in an nPar.
• Access level/Bay level:
OA Administrator, OA Operator
• Restriction:
You must be connected to the monarch OA.
PARMODIFY
• Command:
parmodify -p nPartition_id | -Z parspec_name
{[-a blade:blade_path:[blade_type]:[use_on_next_boot]:
[failure_usage]:[slm_value]]...
[-a io:iobay_path:[use_on_next_boot][:failure_usage]]...
[-c new_parspec_name]
[-d blade:blade_path]...
[-d io:iobay_path]...
[-m blade:blade_path:[blade_type]:[use_on_next_boot]:
[failure_usage]:[slm_value]]...
[-m io:iobay_path:[use_on_next_boot][:failure_usage]]...
[-n res_type:ia_value]
[-B ]
[-G memory_granularity_type:size]
[-L slm_value]
[-M type:max_value]
[-N next_boot_mode]
[-O os_name]
[-P new_nPartition_name]
[-T hyper_threading_flag]
[-V vga_flag]
[-X parspec:change_policy_flag]}
• Description:
Modifies the attributes of an existing nPartition or a partition specification. This command can
modify the following attributes:
◦ nPartition name
◦ VGA assignment
◦ Next boot mode
◦ Partition Specification
◦ Blade assignment
◦ Attributes of existing blades
◦ IO bay assignment
◦ Attributes of existing IO bays
132 Partition commands