SET NTP SECONDARY
• Command:
SET NTP SECONDARY <ip address>>
• Description:
Sets the secondary server used for synchronizing time and date using the NTP protocol
• Access level/Bay level:
OA Administrator, OA Operator
• Restrictions:
You must be connected to the monarch OA.◦
◦ The <ip address> must be in the form ###.###.###.###, where each ### ranges
from 0 to 255.
SHOW COMPLEX INFO
• Command:
SHOW COMPLEX INFO
• Description:
Displays the following fields:
◦ Product name
◦ Complex name
◦ Original product number
◦ Current product number
◦ UUID
◦ Manufacturer
◦ Serial number
◦ Complex type
◦ Configured complex firmware version
During the initialization phase, string values can be set to “Unknown”, “[Unknown]”, or
“None”. If this occurs, try the command again after a few minutes.
• Access level/Bay level:
OA Administrator, OA Operator, OA user
• Restrictions:
You must be connected to the monarch OA.
• Example:
oa_hostname> show complex info
Product Name: Superdome2 16s
Complex Name: Complex1
Original Product Number: AH337A
Current Product Number: AH337A
UUID: Unset
Manufacturer: hp
SET NTP SECONDARY 95
To Next Page