SET LDAP PORT
• Command:
SET LDAP PORT <port number>
• Description:
Sets the TCP port number of the LDAP SSL service. Port 636 is the standard value.
• Access level/Bay level:
OA Administrator
• Restrictions:
The valid port number range is 1 to 65535.
SET LDAP SEARCH
• Command:
SET LDAP SEARCH {1|2|3} "<search content>"
• Description:
Sets up to three search contexts in priority order
• Access level/Bay level:
OA Administrator
• Restrictions:
None
SET LDAP SERVER
• Command:
SET LDAP SERVER {<ip address> | <dns name>}
• Description:
Sets the <ip address> or the <dns name> of the directory server
• Access level/Bay level:
OA Administrator
• Restrictions:
The <ip address> is in the form ###.###.###.###, where each ### is in the range 0 to
255.
SHOW LDAP CERTIFICATE
• Command:
SHOW LDAP CERTIFICATE
• Description:
Displays all LDAP certificates that are in effect on the Onboard Administrator
• Access level/Bay level:
All
38 Directory commands
To Next Page
Loading...
