Fan 3: 14000 RPM (78%)
Fan 4: 14000 RPM (78%)
Fan 5: 14000 RPM (78%)
Fan 6: 14000 RPM (78%)
Fan 7: 14000 RPM (78%)
Fan 8: 14000 RPM (78%)
Fan 9: 14000 RPM (78%)
Fan 10: 14000 RPM (78%)
Fan 11: 14000 RPM (78%)
Fan 12: 14000 RPM (78%)
Fan 13: 14000 RPM (78%)
Fan 14: 14000 RPM (78%)
Fan 15: 14000 RPM (78%)
SHOW ENCLOSURE TEMP
• Command:
SHOW ENCLOSURE TEMP
• Description:
Displays:
◦ Locale
◦ Status (OK, warm, degraded, or failed)
◦ Temperature in degrees Fahrenheit
◦ Temperature in degrees Celsius for all temperature sensors
NOTE: Interconnect modules and GPSMs only display temperature status.
• Access level/Bay level:
All◦
◦ Bay specific
• Restrictions:
◦ There is no temperature display provided for Interconnect Modules or GPSMs. Those
modules will show only Status and Limits.
• Example:
Locale Bay # Temp Status Temp Caution Critical
---------------------- ----- ----------- -------- ------- --------
Enclosure N/A 26C/ 78F --- ---
Onboard Administrator 1 OK 35C/ 95F 75C 80C
Blade Bay 3 Unknown 25C/ 77F 38C 43C
Blade Bay 4 Unknown 26C/ 78F 45C 60C
Blade Bay 8 Unknown 26C/ 78F 35C 38C
Interconnect Module 1 OK ---- --- ---
Interconnect Module 2 OK ---- --- ---
XFM 3 Unknown 26C/ 78F 35C 38C
GPSM 1 OK ---- --- ---
SHOW ENCLOSURE TEMP 83
To Next Page
Loading...
