HP Integrity Superdome 2 16-socket - Upload Parconfig

The url should be formatted as protocol://host/path/<file>. If your ftp server does not support
anonymous connections then you can specify a username and password within the url formatted
as ftp://username:password@host/path/<file>.
IMPORTANT: HP recommends keeping an off-complex copy of configuration backup files
to ensure that complete loss of saved state on the complex does not also result in the loss of
the backup data.
• Access level/Bay level:
OA Administrator
• Restrictions:
You must be connected to the monarch OA to perform this command.
• Example:
oa-host-name> DOWNLOAD PARCONFIG ARCHIVE parconf.pmc
File downloaded successfully.
UPLOAD PARCONFIG
• Command:
UPLOAD PARCONFIG { ARCHIVE <file> | USB <file> | <URL> }
• Description:
Uploads the complex partition configuration to an archive, URL, or USB connected to the
enclosure.
Supported protocols are:
◦ http
◦ ftp
◦ tftp
◦ usb
◦ Archive Storage
The path is the location where the file will be placed. The url should be formatted as
protocol://host/path/<file>. If your ftp server does not support anonymous connections then
you can specify a username and password within the url formatted as
ftp://username:password@host/path/<file>.
IMPORTANT: HP recommends keeping an off-complex copy of configuration backup files
to ensure that complete loss of saved state on the complex does not also result in the loss of
the backup data.
NOTE: If multiple USB keys are found, the configuration file will be saved to the first USB
key that was inserted into the Onboard Administrator.
• Access level/Bay level:
OA Administrator
CLEAR ARCHIVE 187