HP Integrity Superdome 2 16-socket - VPARSTATUS

MeaningOption
remove the vPar in that nPar. If the –n option is not
specified. nparidentstr can be specified as an nPar
name or nPar number.
• Access level/Bay level:
OA Administrator, OA Operator
• Restriction:
You must be connected to the monarch OA.
VPARSTATUS
• Command:
vparstatus [-v | -M] [-p vparidentstr]...
[-N nparidentstr]
vparstatus [-N nparidentstr]
vparstatus [-Z parspecname]
vparstatus -A [-M] [-p vparidentstr] [-N nparidentstr]
vparstatus {-d [cpu_path]}... [-v | -M] [-N nparidentstr]
vparstatus -w [-M]
vparstatus –r [-M]
IMPORTANT: The -N option is mandatory when the command is invoked from the OA. It
is optional when the command is invoked from the OS running on the nPar
• Description:
Displays information about one or more virtual partitions.
The options for the command:
MeaningOption
Specifies the target virtual partition. The vparidentstr
can be specified in ASCII format as a vPar number or
-p vparidentstr
a vPar name, or in the format
nparidentstr:vparidentstr. When specified in
the format nparidentstr:vparidentstr,
nparidentstr and vparidentstr can either be a
name or number.
NOTE: When executed from the OA, the vPar should
be identified using the format
nparidentstr:vparidentstr or used along with
the –n option.
Displays configuration information for CPUs in the nPar.-d [cpu_path]
Detailed display of information.-v
Displays information about available resources-A
Displays attribute and resource information in a
machine-readable format.
-M
Displays the local virtual partition name.-w
150 Partition commands