HP Integrity Superdome 2 16-socket - Show Interconnect Info

Unit Identification LED: Off
Diagnostic Status:
Internal Data OK
Management Processor OK
Firmware Mismatch OK
Indicted OK
SHOW INTERCONNECT INFO
• Command:
SHOW INTERCONNECT INFO [ALL | <bay number> | <bay number>-<bay number>]
• Description:
Displays:
◦ Interconnect type
◦ Product name
◦ Width
◦ Part number
◦ Spare part number
◦ Serial number
◦ Temperature sensor
◦ JS2 Connector
◦ Ethernet information
◦ Serial information
• Access level/Bay level:
All◦
◦ Bay specific
• Restrictions:
You must have explicit access to a bay given by the ASSIGN INTERCONNECT command.
• Example:
OA-0018FE27577F> show interconnect info all
1. Ethernet
Product Name: GbE2c Ethernet Blade Switch
Width: Single
URL to Management interface:
In-Band IPv4 Address: 16.84.189.81
User Assigned Name:
Part Number: 410917-B21
Spare Part Number: 414037-001
Serial Number: MY36290EMT
Temperature Sensor: Present
JS2 Connector: Absent
Internal Ethernet Interface to OA: Present
112 Interconnect management commands