HP Integrity Superdome 2 16-socket - Show Enclosure Powersupply

Status: OK
Display: On
Name: BladeSystem c7000 Insight Display
Spare Part Number: 441203-001
Manufacturer: HP
Fw Version: 2.2.2
Diagnostic Status:
Internal Data OK
SHOW ENCLOSURE POWERSUPPLY
IMPORTANT: In a complex with one or more failed power supplies it is possible for attempts to
power on servers to fail if the resulting power allocation would result in the Power Redundancy
Status becoming Failed. The administrator must explicitly reduce the redundancy setting to enable
powering on servers prior to the failed power supplies being serviced. This applies to AC Redundant
and Power Supply Redundant power modes.
• Command:
SHOW ENCLOSURE POWERSUPPLY {ALL | <power supply number> [{ , | - }
<power supply number>]}
• Description:
Displays:
◦ Power supply status
◦ ac input status
◦ Capacity
◦ Current power output
◦ Serial number
◦ Product name
◦ Part number
◦ Spare part number
◦ Hardware revision for the specified power supply (if one is specified)
◦ Diagnostic status
◦ Range of power supplies, or for all power supplies (if ALL is specified).
• Access level/Bay level:
All
• Restrictions:
None
• Example:
SHOW ENCLOSURE POWERSUPPLY 81