HP Integrity Superdome 2 16-socket - REBOOT PARTITION; SET PARTITION DVD

• Access level/Bay level:
OA Administrator, OA Operator
• Restriction:
nPar ID and vPar ID can either be the name or number of the nPartition or virtual
partition.
◦
◦ You must be connected to the monarch OA.
REBOOT PARTITION
• Command:
REBOOT PARTITION {{<nPar ID>} [:<vPar ID>]} [FORCE] [OVERRIDE]
• Description:
Reboots the OS on the specified nPartition or virtual partition.◦
◦ The FORCE argument ungracefully reboots the OS in the specified partition.
◦ The OVERRIDE argument reboots all virtual partitions on the specified nPartition.
• Access level/Bay level:
OA Administrator, OA Operator
• Restriction:
You must be connected to the monarch OA.
SET PARTITION DVD
• Command:
SET PARTITION DVD { CONNECT | DISCONNECT } { nPartition number or name } [ :vPartition number or name ]
[ ENCLOSURE { enclosure number } ]
• Description:
Connect or disconnect the DVD module to the specified partition.
The DVD module of the compute enclosure containing the primary blade of the partition is the
DVD module that is connected to the partition.
IMPORTANT: Before connecting a DVD to a virtual partition, the iLO rootport (or ioslot) from
any of the blades in the nPartition must be assigned to the target virtual partition.
For information on partition management, see the HP Integrity Superdome 2 Partitioning
Administrator Guide.
NOTE: The DVD module is disconnected from a partition when the partition or the OA is
shut down or rebooted.
• Access level/Bay level:
OA Administrator, OA Operator
140 Partition commands