HP Integrity Superdome 2 16-socket - Connect Enclosure

• Restrictions:
You must be logged on to the monarch OA to perform this command.
• Example:
The output for this command will depend on how the enclosures are linked.
SHOW TOPOLOGY
Detecting linked enclosures ..
Complex Topology
Complex UUID: 09USE7332000
Complex Name: ComplexOne
Rack Name: MyRack
Enc# Enclosure Name Status Local IP Address UUID
---- --------------- ------- ------- -------------- ----------------
1 Enclosure11 OK Yes 15.255.99.100 09O977MU2000
Other linked enclosures which are not part of this complex
Foreign Complex UUID: 09USE7334000
Enc# Enclosure Name Status Local IP Address UUID
---- --------------- ------- ------- -------------- ----------------
1 Enclosure21 OK No 15. 255.99.110 54O999MU2001
CONNECT ENCLOSURE
• Command:
CONNECT ENCLOSURE [ ACTIVE | STANDBY ] { <enclosure number> } [ RUN
<command...> ]
• Description:
Creates an SSH connection to the designated OA in a remote enclosure over the internal
management network. This command is valid from any Active OA.
This command the accepts the following arguments: an optional OA role, active (the default)
or standby, the target enclosure ID and an optional remote command.
• Access level/Bay level:
Any active OA
• Restrictions:
None
• Example:
oa_host_name> connect enclosure 2 run show blade list
Connecting to OA 1 in enclosure 2 …
HP Superdome Onboard Administrator
…
oa2_host_name> show blade list
Bay iLO Name iLO IP Address Status Power UID Partner
--- ---------------- --------------- ------ ------- ----------
1 iLO-002264fd6b66 16.119.111.8 OK Off Off
2 iLO-00237dd51582 16.119.110.98 OK Off Off
3 iLO-002481bc8114 16.119.111.61 OK Off Off
20 Rack commands