To execute a configuration script from a USB key, use usb://<directory name>/<script
file name>.
To execute a configuration script from archive storage, use the URI shown by the SHOW
ARCHIVE command.
• Access level/Bay level:
OA Administrator
• Restrictions:
You must format the <url> as protocol://host/path/file.◦
◦ The file cannot change the Administrator account password.
◦ The user password is not saved or restored by the DOWNLOAD CONFIG command.
DOWNLOAD SSHKEY
• Command:
DOWNLOAD SSHKEY <url>
• Description:
Downloads an authorized key file to use for SSH logins. The file contains the public keys
for users.
◦
◦ Supported protocols are HTTP, FTP, and TFTP.
◦ Format the <url> as protocol://host/path/file.
• Access level/Bay level:
Administrator
• Restrictions:
None
ENABLE ALERTMAIL
• Command:
ENABLE ALERTMAIL
• Description:
Enables the sending of alert emails when an event occurs
• Access level/Bay level:
OA Administrator, OA Operator
• Restrictions:
You can issue this command only if the configuration has been set up.
ENABLE ENCLOSURE_IP_MODE
• Command:
ENABLE ENCLOSURE_IP_MODE
• Description:
Enables Enclosure IP Mode
60 Enclosure network configuration commands
To Next Page