DIMMERR
• Command:
DIMMERR <physical location>
• Description:
Displays all errors experienced by DIMMs on a specified blade or all errors for a specified
DIMM.
• Access level/Bay level:
All
• Restrictions:
The <physical location> must correspond to a DIMM slot or a blade and must be
formatted as either an 8–byte hexadecimal integer, or a long or medium hardware
resource path string (short form strings are not supported).
◦
◦ Must be in the Health Repository viewer.
• Example:
myhost-HR> dimmerr blade-1/1
DIMM INFO for Cabinet: 1 Board Slot: 1 dimm-1/1/0/1 Location: 1A
Status: OK No Errors Logged.
dimm-1/1/0/2 Location: 2C
Status: OK No Errors Logged.
dimm-1/1/0/3 Location: 3B
Row Bank Col Type Errors First Detected Last Detected
---- ---- --- ---- ------ --------------------- -----------------------------
0 256 0 0 1 Fri Feb 11 18:10:51 2011 Fri Feb 11 18:10:51 2011
dimm-1/1/0/4 Location: 4D
Status: OK No Errors Logged.
dimm-1/1/0/5 Location: 5D
myhost-HR>
156 Health Repository commands
To Next Page
Loading...
