HP Integrity Superdome 2 16-socket - Error Logging Services Commands; SHOW ERRDUMP

25 Error Logging Services commands
SHOW ERRDUMP
• Command:
SHOW ERRDUMP {<logtype> [nPar:<nPar #>] | dir <logtype>
| bundle_id <bundleID> | pdhc <logtype>
[<enclosure #>:<blade #>]}
• Description:
Displays the raw error logs generated by the Error Logging Services for use in troubleshooting
of the specified <logtype> for all partitions, or for the specified nPartition.
◦ The dir argument lists the available log bundle IDs of the specified <logtype>.
◦ The bundle_id argument displays the logs of the specified <bundleID>.
◦ The pdhc argument displays the logs of the specified <logtype> in PDHC storage for
all blades, or for the specified target.
• Access level/Bay level:
All
• Restrictions:
The <logtype> must be one of the following:
◦ mca
◦ init
◦ cmc
◦ cpe
◦ hr
◦ all: does not include init.
You must be logged on to the monarch OA to perform this command.
168 Error Logging Services commands