HP Integrity Superdome 2 16-socket - Page 136

[-A]
[-M]
parstatus {-P}
[-Z]
[-v]
[-M]
parstatus {-i IOresource}...
[-M] [-V]
parstatus {-c blade }} ...
[-M] [-V]
parstatus {-e enclosure }}...
[-M] [-V]
parstatus {-p nPartitionId}…
[-v]
[-z]
[-Z]
[-M]
[-V]
[-T]
parstatus {-Z parspecName}…
parstatus {–s }
parstatus {-w
[-M] }
parstatus {-S}
parstatus {–X}
parstatus {-r}
parstatus {-L}
parstatus {-T}
[-M]
• Description:
Displays information about a system complex. If no arguments are supplied, all major
components that are physically present in the system complex are listed. A specific component
(blade, I/O bay, enclosure, or nPartition) can be specified in order to restrict the output
information about that component.
NOTE: parstatus output is limited to 80 columns, and as a result, some output may be
truncated. Use the verbose option in such cases to view the detailed information if necessary.
The options for the command:
MeaningOption
Displays information about the specified nPartition(s). The
nPartition id can be specified as an nPartition number or
an nPartition name.
{-p nPartitionId}
Displays information for all nPartitions in the complex.-P
Displays information about the specified blade(s).{-c blade}
Displays information for all blades in the complex.-C
Displays information about the specified enclosures(s).{-e enclosure}
Displays information for all enclosures in the complex-E
136 Partition commands