214
[CEa1] multicast routing
[CEa1-mrib] quit
# Assign an IP address to GigabitEthernet 2/1/1, and enable PIM-SM on the interface.
[CEa1] interface gigabitethernet 2/1/1
[CEa1-GigabitEthernet2/1/1] ip address 10.11.5.1 24
[CEa1-GigabitEthernet2/1/1] pim sm
[CEa1-GigabitEthernet2/1/1] quit
# Assign an IP address to GigabitEthernet 2/1/2, and enable PIM-SM on the interface.
[CEa1] interface gigabitethernet 2/1/2
[CEa1-GigabitEthernet2/1/2] ip address 10.11.1.2 24
[CEa1-GigabitEthernet2/1/2] pim sm
[CEa1-GigabitEthernet2/1/2] quit
# Assign an IP address to Loopback 1, and enable PIM-SM on the interface.
[CEa1] interface loopback 1
[CEa1-LoopBack1] ip address 2.2.2.2 32
[CEa1-LoopBack1] pim sm
[CEa1-LoopBack1] quit
# Configure Loopback 1 as a C-BSR and a C-RP for VPN instance a.
[CEa1] pim
[CEa1-pim] c-bsr 2.2.2.2
[CEa1-pim] c-rp 2.2.2.2 1
[CEa1-pim] quit
# Configure OSPF.
[CEa1] ospf 1
[CEa1-ospf-1] area 0.0.0.0
[CEa1-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
[CEa1-ospf-1-area-0.0.0.0] network 10.11.0.0 0.0.255.255
[CEa1-ospf-1-area-0.0.0.0] quit
[CEa1-ospf-1] quit
6. Configure CE b1:
# Enable IP multicast routing.
<CEb1> system-view
[CEb1] multicast routing
[CEb1-mrib] quit
# Assign an IP address to GigabitEthernet 2/1/1, and enable PIM-SM on the interface.
[CEb1] interface gigabitethernet 2/1/1
[CEb1-GigabitEthernet2/1/1] ip address 10.11.6.1 24
[CEb1-GigabitEthernet2/1/1] pim sm
[CEb1-GigabitEthernet2/1/1] quit
# Assign an IP address to GigabitEthernet 2/1/2, and enable PIM-SM on the interface.
[CEb1] interface gigabitethernet 2/1/2
[CEb1-GigabitEthernet2/1/2] ip address 10.11.2.2 24
[CEb1-GigabitEthernet2/1/2] pim sm
[CEb1-GigabitEthernet2/1/2] quit
# Configure OSPF.
[CEb1] ospf 1
To Next Page
Loading...
