Figure 10-51 Installing ground cables
Step 2 Installing battery module power cables.
1. Use a wrench to remove the waterproof glands from the cascading terminals
of the battery modules.
2. Install battery module power cables.
3. Use a removal wrench to remove the waterproof glands from the battery
terminals on the power module.
4. Install power cables between the battery modules and power module.
iSitePower-M (MAP05A1, MAB05B1)
User Manual 10 Electrical Connections
Issue 06 (2023-04-24) Copyright © Huawei Digital Power Technologies Co., Ltd. 140
To Next Page
Loading...
