Huawei iSitePower-M MAP05A1 - Battery Module

Pin Signal Description
8 CANL
Table 5-5 COM-BAT pin denitions
Pin Signal Description
1 START+ Manual ON/OFF switch
2 START–
3, 4, 5, 6 Null -
7 CANH CAN bus high level
8 CANL CAN bus low level
Table 5-6 Pin
denitions for the FE port
Pin Signal Description
1 TX+ Transmit data over FE.
2 TX–
3 RX+ Receive data over FE.
6 RX–
4, 5, 7, 8 Null -
5.2 Battery Module
The standard capacity is 5 kWh.
Figure 5-5 Appearance
iSitePower-M (MAP05A1, MAB05B1)
User Manual 5 Components
Issue 06 (2023-04-24) Copyright © Huawei Digital Power Technologies Co., Ltd. 43