Figure 7-1 Clearance
7.2 Installing a Mounting Bracket
7.2.1 Ground Mounting
The base must be secured to the ground using bolts. Otherwise, the device may
tip over, causing personal injury or device damage.
Procedure
Two marking-o templates are required for ground mounting. A small marking-o
template determines holes on the ground, and a large marking-o template determines
holes on the wall.
Step 1 Cut the
marking-o template along the dotted line.
Figure 7-2 Cutting the
marking-o template
iSitePower-M (MAP05A1, MAB05B1)
User Manual 7 System Installation
Issue 06 (2023-04-24) Copyright © Huawei Digital Power Technologies Co., Ltd. 74
To Next Page
Loading...
