Huawei iSitePower-M MAP05A1 - Label Description

4.4 Label Description
Enclosure Labels
Table 4-6 Enclosure label description
Label Item Description
Tiltwatch The product may tilt,
which may cause
personal injury or
device damage. Secure
the product to the
ground using screws.
Burn warning Do not touch the
product because the
enclosure is hot when
it is running.
Delayed discharge High voltage exists
after the product is
powered on. Residual
voltage still exists after
the product is powered
o. It takes 5 minutes
for the product to
discharge to the safe
voltage.
Operation ● High voltage exists
after the product is
powered on. Only
qualied and
trained electrical
technicians are
allowed to install
and operate the
product.
● Ground the product
before powering it
on.
Refer to
documentation
Reminds operators to
refer to the
documentation of the
battery.
Operation warning Do not remove the
connector when the
product is running.
iSitePower-M (MAP05A1, MAB05B1)
User Manual 4 Product Description
Issue 06 (2023-04-24) Copyright © Huawei Digital Power Technologies Co., Ltd. 37