Huawei iSitePower-M MAP05A1 - Installing Output Power Cables for the AC Parallel Box

10.7.3 Installing Output Power Cables for the AC Parallel Box
CA UTION
● The live (L) wire and neutral (N) wire of an AC power cable must be correctly
connected.
● The PE wire of an AC power cable must be grounded.
● Do not reversely connect AC output power cables.
NO TICE
● Install short-circuit plates for AC output circuit breakers.
● The three cables from the AC output circuit breaker to the power modules must
be of the same length.
Procedure
Step 1 Install AC output power cables for the parallel box.
iSitePower-M (MAP05A1, MAB05B1)
User Manual 10 Electrical Connections
Issue 06 (2023-04-24) Copyright © Huawei Digital Power Technologies Co., Ltd. 151