Huawei iSitePower-M MAP05A1 - System Commissioning

11 System Commissioning
D ANGER
● Wear personal protective equipment and use dedicated insulated tools to avoid
electric shocks or short circuits.
CA UTION
● During the power-on procedure, power o the batteries immediately if any
fault is detected. Rectify the fault before proceeding with the procedure.
● After batteries are used for system commissioning or batteries have discharged,
charge the batteries in time. Otherwise, batteries may be damaged due to
overdischarge.
● Battery overdischarge and damage may occur if batteries with low SOC are
stored. Batteries should be recharged in a timely manner.
NO TICE
Before the equipment is put into operation for the rst time, ensure that the
parameters are set correctly by professional personnel. Incorrect parameter
settings may result in noncompliance with local grid connection requirements and
aect the normal operations of the equipment.
iSitePower-M (MAP05A1, MAB05B1)
User Manual 11 System Commissioning
Issue 06 (2023-04-24) Copyright © Huawei Digital Power Technologies Co., Ltd. 164