Huawei iSitePower-M MAP05A1 - Optional) Installing Battery Modules for Capacity Expansion

Figure 7-14 Wall mounting completed
----End
7.4 (Optional) Installing Battery Modules for Capacity
Expansion
NO TICE
● A maximum of three battery modules can be installed on a bracket or base. If
more than three battery modules are required, add a bracket.
● For details about how to install brackets and modules, see 7.2 Installing a
Mounting Bracket and 7.3 Installing Modules.
Step 1 Remove the L-shaped plates from the top cover, rotate them by 180 degrees, and
install them back on the top cover.
Figure 7-15 Rotating the L-shaped plates on the top cover
Step 2 Install the top cover on the battery module.
iSitePower-M (MAP05A1, MAB05B1)
User Manual 7 System Installation
Issue 06 (2023-04-24) Copyright © Huawei Digital Power Technologies Co., Ltd. 81