● Package boards or modules with ESD packaging materials before storing or
transporting them.
1.3 Environment Requirements
Do not expose the equipment to ammable or explosive gas or smoke. Do not
perform any operation on the equipment in such environments.
Do not store any ammable or explosive materials in the equipment area.
Do not place the equipment near heat sources or re sources, such as smoke,
candles, heaters, or other heating devices. Overheat may damage the equipment
or cause a re.
Install the equipment in an area far away from liquids. Do not install it under
areas prone to condensation, such as under water pipes and air exhaust vents, or
areas prone to water leakage, such as air conditioner vents, ventilation vents, or
feeder windows of the equipment room. Ensure that no liquid enters the
equipment to prevent faults or short circuits.
To prevent damage or re due to high temperature, ensure that the ventilation
vents or heat dissipation systems are not obstructed or covered by other objects
while the equipment is running.
General Requirements
● The installation and usage environment must meet relevant international,
national, and local standards for lithium batteries, and are in accordance with
the local laws and regulations. The user is obliged to protect the ESS against
re or other hazards.
● Keep the ESS out of the reach of children and away from daily working or
living areas, including but not limited to the following areas: studio, bedroom,
lounge, living room, music room, kitchen, study, game room, home theater,
sunroom, toilet, bathroom, laundry, and attic.
iSitePower-M (MAP05A1, MAB05B1)
User Manual 1 Safety Information
Issue 06 (2023-04-24) Copyright © Huawei Digital Power Technologies Co., Ltd. 8
To Next Page
Loading...
