2 Transportation and Storage
2.1 Transportation Requirements
Load or unload batteries with caution. Otherwise, the batteries may be short-
circuited or damaged (such as leakage and crack), catch
re, or explode.
Do not move a battery by holding its terminals, bolts, or cables. Otherwise, the
battery may be damaged.
Keep batteries in the correct direction during transportation. They must not be
placed upside down or tilted, and must be protected against falling down,
mechanical impact, rains, snows, and falling into water during transportation.
Before unpacking, storage, and transportation, ensure that the packing cases are
intact and the batteries are correctly placed according to the labels on the packing
cases. Do not place a battery upside down or vertically, lay it on one side, or tilt it.
Stack the batteries according to the stacking requirements on the packing cases.
Ensure that the batteries do not fall or get damaged. Otherwise, they will need to
be scrapped.
● Batteries have obtained the certications of the UN38.3 (UN38.3: section 38.3
of the sixth Revised Edition of the Recommendations on the Transport of
Dangerous Goods, Manual of Tests and Criteria) and SN/T 0370.2-2009 (Part
2: Performance Test of the Rules for the Inspection of Packaging for Exporting
Dangerous Goods). The batteries belong to class 9 dangerous goods.
iSitePower-M (MAP05A1, MAB05B1)
User Manual 2 Transportation and Storage
Issue 06 (2023-04-24) Copyright © Huawei Digital Power Technologies Co., Ltd. 21
To Next Page
Loading...
