Huawei iSitePower-M MAP05A1 - Page 176

Figure 11-4 Connecting to the device
NO TE
● The Quick Setup screen is displayed upon the rst login.
● Use the initial password to log in for the rst time and change the password as
prompted. To ensure account security, protect the password by changing it periodically,
and keep it secure. Your password might be stolen or cracked if it is left unchanged for
extended periods. If a password is lost, devices cannot be accessed. In these cases, the
Company shall not be liable for any loss.
● If the login screen is not displayed after you scan the QR code, check whether your
phone is correctly connected to the device WLAN. If not, manually select and connect to
the WLAN, and tap Next.
● In a parallel system, perform quick setup on the master product.
Step 2
Congure communications networking parameters and the management system
domain name based on site requirements.
NO TE
● In parallel system scenarios, set communication networking parameters and the
management system domain name on the master system.
● (Optional) If the connection mode is set to FE, choose Maintenance > Network
Conguration > Local Area Connection to congure router parameters after the quick
settings are complete.
iSitePower-M (MAP05A1, MAB05B1)
User Manual 11 System Commissioning
Issue 06 (2023-04-24) Copyright © Huawei Digital Power Technologies Co., Ltd. 167