The detailed description is as follows:
1. If batteries emit smoke or catch
res, notify all household members to evacuate
immediately.
2. After evacuating to a safe outdoor area (20 m away is recommended), call the
re department immediately. While waiting for the re rescue, contact the
installer and Huawei technical support.
3.
Fireghters arrive at the site and extinguish the re.
4. After the re is extinguished, set up a warning sign to isolate the area and spray
water to reduce the battery temperature to the room temperature±10°C. (You can
use an infrared thermometer or thermal imager.)
5. Observe the batteries for 24 hours and ensure that there is no sign of
temperature rise before removing the batteries. (Only professionals are allowed to
remove the batteries.)
6. After removing the batteries, move them to a safe place (an open and safe
outdoor place is recommended), place them in the
re sand box or salt water.
These operations must be performed by professionals who must take insulation
measures, such as wearing insulated gloves, insulated shoes, and personal
protective equipment (PPE).
iSitePower-M (MAP05A1, MAB05B1)
User Manual 3 Emergency Handling
Issue 06 (2023-04-24) Copyright © Huawei Digital Power Technologies Co., Ltd. 27
To Next Page
Loading...
