No. Item Note
6 Ground
color: red,
bright gray
Red indicates that a critical alarm is generated,
as shown in .
Bright gray indicates that the device is operating without
any critical alarms,
as shown in .
If the teamwork networking is successful, the teamwork icon is green. If the teamwork
networking fails, the teamwork icon is red. If the teamwork networking is disabled, the
teamwork icon is gray.
----End
Follow-up Procedure
After you have completed the teamwork settings, perform the following checks to
conrm whether the teamwork networking is successful:
1. Check whether the number of devices in the topology is the same as the
actual number of devices.
– If yes, go to 2.
– If no, check the cable connection and the settings of teamwork control
parameters.
2. Check that the number of the running devices in the topology is the same as
the actual number of devices.
– If yes, go to 3.
– If no, check the cable connection and the settings of teamwork control
parameters.
3. Check that the number of standby devices in the topology is the same as the
actual number of devices.
– If yes, go to 4.
– If no, check the cable connection and the settings of teamwork control
parameters.
4. Check that the number of online devices in the topology is the same as the
actual number of devices.
– If yes, the check is complete.
– If no, check the cable connection and the settings of teamwork control
parameters.
NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual 6 Power-On Commissioning
Issue 08 (2021-09-17) Copyright © Huawei Technologies Co., Ltd. 149
To Next Page
Loading...
Need help?
General
