Huawei Quidway S3100 Series User Manual

Operation Manual – SNMP
Quidway S3100 Series Ethernet Switches Chapter 1
SNMP Configuration
Huawei Technologies Proprietary
1-4
Table 1-2 Configure SNMP basic functions for SNMP V1 and SNMP V2C
Operation Command Description
Enter system view
system-view
—
Enable SNMP Agent
snmp-agent
Optional
By default, SNMP
Agent is disabled.
To enable SNMP
Agent, you can
execute this
command or those
commands used to
configure SNMP
Agent features.
Set system information
snmp-agent sys-info
{ contact sys-contact |
location sys-location |
version { { v1 | v2c |
v3 }* | all } }
Required
By default, the contact
information for system
maintenance is "R&D
Beijing, Huawei
Technologies Co.,
Ltd.", the system
location is "Beijing
China", and the
SNMP version is
SNMP V3.
Direct
configu
ration
Set a
commun
ity name
snmp-agent
community { read |
write } community-name
[ acl acl-number |
mib-view view-name ]
Set an
SNMP
group
snmp-agent group { v1
| v2c } group-name
[ read-view read-view ]
[ write-view write-view ]
[ notify-view
notify-view ] [ acl
acl-number ]
Set a
communi
ty name
and
access
authority
Indirect
configu
ration
Add a
new
user for
an
SNMP
group
snmp-agent usm-user
{ v1 | v2c } user-name
group-name [ acl
acl-number ]
Required
Direct configuration
for SNMP V1 and
SNMP V2C is based
on community name.
Indirect configuration.
The added user is
equal to the
community name for
SNMPV1 and
SNMPV2C.
You can choose either
of them as needed.
Set the maximum size of
SNMP packet that the Agent
can send/receive
snmp-agent packet
max-size max-size
Optional
By default, it is 1,500
bytes.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English