Operation Manual – Login
Quidway S3100 Series Ethernet Switches Chapter 3 Logging in through Telnet
Huawei Technologies Proprietary
3-13
Scenario
Authentication mode User type Command
Command
level
The user privilege
level level command is
executed, and the
service-type command
does not specify the
available command
level.
The user privilege
level level command is
executed, and the
service-type command
specifies the available
command level.
Determined
by the user
privilege
level level
command
The user privilege
level level command is
not executed, and the
service-type command
does not specify the
available command
level.
Level 0
The user privilege
level level command is
not executed, and the
rvice-type command
fies the available
command level.
se
speci
Determined
by the
service-type
command
The user privilege
level level command is
executed, and the
service-type command
does not specify the
available command
level.
Level 0
VTY users
that are
authenticated
in the
password
mode of SSH
The user privilege
level level command is
executed, and the
service-type command
specifies the available
command level.
Determined
by the
service-type
command
 Note:
Refer to the corresponding modules in this manual for information about AAA, RADIUS,
and SSH.