S1700 Managed Series Ethernet Switches 
Web User Manual 
Huawei Proprietary and Confidential           
Copyright © Huawei Technologies Co., Ltd. 
Click the Select button to specify the effective period of the rules. 
 
Step 3  Configure the needed parameter. 
Step 4  Click Apply button to apply all the changes made. 
----End 
 
Create a Rule for Extension MAC 
Step 1  Click ACL>ACL Profile. 
Step 2  Click a created extending MAC rule in ACL list, and click New button in the list box of ACL 
Rule to add a new rule, opening the configuration shown page as below.     
Figure 6-8 New Extension of MAC Rules 
 
 
Table 6-8 Parameters of Extending MAC Rule 
ACL entry number that rule belongs to. 
Enter rule number, and the value ranges from 1 to 65535. If not 
specified, the system will assign automatically. 
Specify switch to permit or deny data stream that matches to the 
rule.