Huawei S1700 Series - Apply Traffic Policy

S1700 Managed Series Ethernet Switches
Web User Manual
7 QoS Configuration
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
112
7.8.4 Apply Traffic Policy
Click QoS>Traffic Management >Apply Traffic Policy to apply traffic policy configured on
switch to interface or VLAN; the configuration page is shown as the figure below.
Figure 7-20 Apply Traffic Policy
Table 7-15 Parameters of Applying Traffic Policy
Item
Description
Query
Query configuration information of traffic policy according to
interface name, VLAN ID
Interface or VID
Interface ID/VLAN ID which applies policy.
Policy Name
The applied policy name of interface
Direction
The data direction of the applied policy name only supports ingress.
Add a Traffic Application
Step 1 Click QoS>Traffic Management >Apply Traffic Policy.
Step 2 Click New button to add a traffic policy application, opening the configuration shown as
below.
Figure 7-21 Configure Traffic Policy