Huawei Proprietary and Confidential           
Copyright © Huawei Technologies Co., Ltd. 
 
----End 
7.7.2 SRED Information 
Click QoS > SRED > SRED Information to configure SRED Profile applied to interface on 
switch; the configuration page is shown as the figure below. 
Figure 7-10 RED Information 
 
 
Set SRED Information 
Step 1  Click QoS > SRED, and then click SRED Information in Tab. 
Step 2  Click the SRED information needed and click Config button to open the following page.