Huawei S1700 Series - 5.3 S1730 S Series Hardware Details

To Next Page

To Previous Page

S1700 Managed Series Ethernet Switches

Web User Manual

9 Security

Issue 05 (2012-10-25)

Huawei Proprietary and Confidential

151

Configure DHCP Snooping Trust Status for Interface

Step 1 Click Security> DHCP Snooping.

Step 2 Click Interface Trust Settings in Tab.

Step 3 Click the checkbox on the left side of DHCP Snooping trust interface to be configured, and

then click Configure button, the configuration page is displayed as follows.

Figure 9-37 Configure Interface Trust Settings

Step 4 Select Trust Interface from Status field to configure switch trust DHCP Server message from

the interface.

Step 5 Click Apply button to apply the changes made.

----End

CAUTION

Interface with IPSG enabled can not be set to DHCP Snooping trusted.

9.8.4 Interface Parameter Settings

Click Security> DHCP Snooping> Interface Parameter Settings, the configuration page is

displayed as follows.

Figure 9-38 Interface Parameter Settings

Other manuals for Huawei S1700 Series