Huawei S1700 Series - Reboot

S1700 Managed Series Ethernet Switches
Web User Manual
3 System Management
S1700 Managed Serie s Etherne t Switches
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12
Table 3-1 Parameters of Reset Factory
Item
Description
Reset Factory
Reset switch to factory default configuration.
Reset to factory , but keep IP
address
Reset all configuration information of switch apart from
IP address.
Reset switch to factory settings
Step 1 Click System Management > Reset Factory.
Step 2 Click Reset Factory.
Step 3 Click Apply button to apply all the changes made.
----End
3.2 Reboot
Click System Management > Reboot to bounce a device reboot webpage. Select System
Software and Configuration File options under the Next Startup File to set this switch to start
next time, the configuration page is as shown in Figure 3-2.
Figure 3-2 Set Startup File
Table 3-2 Parameters of Reboot
Item
Description
Current Startup File
It shows the system software and configuration files currently
used by switch
Next Startup File
System Software: select firmware version of next startup.
Configuration File:select configuration file of next startup.