Huawei S1700 Series - SNMP Trap Settings

S1700 Managed Series Ethernet Switches
Web User Manual
10 Network
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
185
Step 4 Enter Group Name in the group to which user belong, such as "public" created in the above
example.
Step 5 Select Password from SNMP V3 Encryption list.
Step 6 Select the encryption protocol from Auth-protocol by Password list, and enter encryption
password in Password field.
Step 7 Click Apply button to apply all the changes made.
----End
10.1.7 SNMP Trap Settings
Click Network>SNMP>SNMP Trap Settings, the configuration page is displayed as follows.
Figure 10-12 SNMP Trap Settings
Table 10-8 Parameters of SNMP Trap Settings
Item
Description
SNMP Trap
Enable / disable the global SNMP Trap function.
SNMP Authentication Trap
The system sends SNMP notification while t detects SNMP
Authentication Trap .
SNMP Link Change Trap
The system sends SNMP notification while detects link
changing.
SNMP Warm Start Trap
The system sends SNMP notification while detects hot start
of system.
SNMP Cold Start Trap
The system sends SNMP notification while detects cold
start of system.
SNMP New Root Trap
The system sends SNMP notification while detects a new
root bridge generated.
SNMP Topology Change
Trap
The system sends SNMP notification while detects STP
topology changing.
SNMP DDM Trap
The system sends SNMP notification while detects DDM
plugging.