Huawei S1700 Series - Software Upgrade

S1700 Managed Series Ethernet Switches
Web User Manual
3 System Management
S1700 Managed Serie s Etherne t Switches
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13
Assignment of Switch Startup File
Step 1 Click System Management > Device Reboot to bounce a webpage as shown in Fig.3-2.
Step 2 Select corresponding startup file in Next Startup File.
Step 3 Click Reboot button to apply all the changes made, which will take effect next startup.
----End
3.3 Software Upgrade
This series of switch supports software upgrade by means of HTTP and FTP.
Click System Management> Software Upgrade, to upgrade software of the switch, the
configuration page is as shown in Fig.3-3:
Figure 3-3 Software Upgrade
Table 3-3 Parameters of Software Upgrade
Item
Description
HTTP
Click Browse to choose firmware files to be upgraded, which is stored in
computer with a suffix of „.cc‟, such as S1700V100R007B39.cc.
FTP
IPv4 address: enter IPv4 address of FTP download server.
IPv6 address: or enter IPv6 address of FTP download server.
Username/password: enter username and password of FTP download
server.
TCP port: enter TCP port number of FTP download server.
File name: complete path and filename of firmware file.
Saved as: firmware file name saved on switch after upgrade without slash
(/), the first character excluding point (.), and length of filename is not
more than 64 characters (valid characters including: A-Z, a-z, 0-9, „.‟,
„-„ and „_‟.
Start
Click this button to upgrade software.