Huawei S1700 Series - Dot1 Tlvs

S1700 Managed Series Ethernet Switches
Web User Manual
10 Network
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
197
Table 10-16 Parameters of The Basic TLVs
Item
Description
Query
Search the basic TLVs settings of specified interface in Interface
Name.
Interface Name
Interface number
Port Description
Whether to publish port description. Port Description includes
manufacturer, product name, and the hardware / software version
of interface.
System Name
Whether to publish the distribution system name. The system
name contains the management name of the system.
System Description
Whether to publish the description of distribution system. System
descriptions include the hardware type of system, operating
system, version information of network software and full name.
System Capabilities
Whether to publish system capabilities. System capabilities
include main function of system and enabled items.
Configure parameters of basic TLVs for interface
Step 1 Click Network > LLDP.
Step 2 Click the Basis of TLVs in tab.
Step 3 Click the check box on the left side of the configuring basic TLVs parameter interface, and
then click Configure to open the following page.
Figure 10-29 Configure The Basic TLVs Parameter
Step 4 Enable to publish the relevant parameter.
Step 5 Click Apply button to apply all the changes made.
----End
10.3.5 Dot1 TLVs
Click Network > LLDP > Dot1 TLVs to configure IEEE802.1 information of advertisement
TLV, the configuration page is displayed as follows.