Huawei S1700 Series - SNMP User

S1700 Managed Series Ethernet Switches
Web User Manual
10 Network
Issue 05 (2012-10-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
183
Figure 10-9 Create a SNMP Group
Step 3 Enter the group name to be created in Group Name field.
Step 4 Select SNMPv3 from User-based Security Model list.
Step 5 Enter Community View in Read View, Write View, and Notify View field.
Step 6 Click Apply button to apply all the changes made.
----End
10.1.6 SNMP User
Click Network>SNMP>SNMP User, the configuration page is displayed as follows.
Figure 10-10 SNMP User
Table 10-6 Parameters of SNMP User
Item
Description
User name
User name, up to 32 characters, is used to identify the SNMP user.
Engine ID
SNMP engine ID is the unique identifier to identify SNMP V3, and it
is used to identify the SNMP entity of switch on network.
Group Name
The SNMP group name that the user belongs to.
Security Level
Specify SNMPv3 that will be used, which provides securely access
for equipment by authenticating and encrypting the packets on the
network.
Auth Protocol
The authentication protocol for MD5 (using HMAC-MD5-96
Authentication Protocol) or SHA (HMAC-SHA authentication
protocol to use).